- Re-usable Hygiene Mask.
- Exclusive HSN design®.
- Can be washed up to 15 times.
- Aitex® certified internal material.
- Absence of hazardous materials, certified by Oeko-Tex® Standard 100.
Table of contents
HSN Mask by HSNaccesories is a facial textile accessory that covers the mouth, nose and chin. It's fitted with two lateral elastic cords for support and its internal filter fabric meets the acceptance criteria set out in the UNE 0065:2020 technical specifications.
The HSN Mask is made from two layers of fabric:
- An external layer of 100% customised polyester printed with our unique HSN design.
- An internal layer of 80% polyester/20% polyamide with fabric certified by Aitex® and conforming with the UNE:0065:2020 standard.
WARNING: This item is not a medical device in the sense of Directive 93/42 or Regulation (EU) 2017/745, nor is it personal protective equipment in the sense of Regulation (EU) 2016/425.
During the COVID-19 pandemic, the Spanish government published the SDN/354/2020' regulation, April 19, establishing exceptional measures to ensure public access to products recommended for use as hygiene measures to prevent the spread of COVID-19.
In the second measure of that regulation, 'scope of application', is recognised as:
“Products necessary for the protection of the population's health, understood as those that, without having the condition of a medicine or health product, are considered essential to minimise the risk of spreading COVID-19 amongst people. In particular:
Hygienic masks, both non-reusable (single use) and reusable, understood as the facial protection that covers the mouth, nose and chin and that is fitted with a head harness and meets the requirements established in the technical specifications UNE 0064-1:2020, UNE 0064-2:2020, UNE 0065:2020 or any equivalent standard.”
The material the HSN® Mask is made from complies with the criteria established for the use of this face protection in regulation SDN/354/2020.
The acceptance criteria for reusable hygiene masks set numerical cutting values for the tissue from which reusable hygiene masks are made.
The internal filter liner of the HSN® mark complies with the acceptance criteria of:
- Filtration efficiency by BFE test.
- Breathability determined by differential pressure.
The tests have been carried out and the fabric is certified by the AITEX® Textile Technology Institute.
Many manufacturers will accentuate maximum filtration levels, comparable to a PPE, however, hygienic masks are not medical devices, and achieving these filtration grades in non-sanitary material seriously affects breathability.
Another critical feature for determining the quality of a hygienic mask according to UNE standards, is that the material in contact with the skin does not present known risks of irritation or adverse health effects.
The material used in the manufacture of our mask is not liable to release irritant substances into the inhaled environment, and does not constitute a hazard or a nuisance for the user.
The fabric has Standard 100 certification by Oeko-Tex®. It is the world-leading eco-label for textile products that have been evaluated and certified by internationally recognised institutes. This certification assures the consumer that the textile products have been tested for harmful substances.
In addition, the certified fabric is water-repellent, which means it repels water, acting as a barrier to viruses and bacteria.
Made completely according to UNE standards
Not only do the characteristics of the fabric comply with the standardisation of the norms, but the mask itself does too, which has also been made according to these norms.
The dimensions of the mask have been developed according to the measurements for cutting and making the 'adults for over 12 years'.
A height of 9.5cm x 18cm width.
It has standardised dimensions on the ear harnesses, made with elastic material bands of 21cm.
The re-usable hygiene masks must be able to withstand at least 5 washing and drying cycles according to the UNE 0065:2020 specification. The Aitex® filter material tests have been carried out before the first washing and drying cycle and after the fifth:
The certified fabric is guaranteed to maintain its protection and comfort characteristics after 5 washing and drying cycles.
Taking into account the thresholds established by the standard, the variation rate for the parameters are determined in relation to the number of washing and drying cycles, and the starting values:
It is estimated that the regulatory properties of the mask can be maintained for up to 15 wash and dry cycles safely.
The use of the mask is simple and only the following steps should be followed carefully.
It is recommended to place the mask directly on the skin without textile intermediaries.
- Wash your hands with soap and water, or, alternatively, with sanitiser, before using the mask.
- Identify the top of the mask.
- Position the mask over the face, at nose level. Adjust the nose clip slightly. Hold the mask from the outside and secure the fastener behind the mask with our HSN Ear Saver, or on either side of the ears.
- Lower the lower part of the mask to the chin, and check that the mask covers the chin.
- Pinch the nose clip with both hands to adjust it to the nose.
The mask can be washed at temperatures up to 60ºC, and ironed up to a maximum of 110ºC. Do not apply bleach, tumble dry or dry clean to preserve its properties.
Videos Related To HSN MASK
A satisfied customer says:
Good and comfortable mask
Perfect for training at the gym. It is very comfortable and breathes perfectly. Sincerely one of the most comfortable I've ever used.Show original language
A critical customer says:
I was not very happy with the new format. The ones that suited me very well were the orange ones.Show original language
No reviews found with filters applied.